Authentication and Authorization

Related Modules and Directives

There are three types of modules involved in the authentication and authorization process. You will usually need to choose at least one module from each group.

• Authentication type (see the AuthType directive)
  • mod_auth_basic
  • mod_auth_digest
• Authentication provider (see the AuthBasicProvider and AuthDigestProvider directives)
  • mod_authn_anon
  • mod_authn_dbd
  • mod_authn_dbm
  • mod_authn_file
  • mod_authnz_ldap
  • mod_authn_socache
• Authorization (see the Require directive)
  • mod_authnz_ldap
  • mod_authz_dbd
  • mod_authz_dbm
  • mod_authz_groupfile
  • mod_authz_host
  • mod_authz_owner
  • mod_authz_user

In addition to these modules, there are also mod_authn_core and mod_authz_core. These modules implement core directives that are core to all auth modules.

The module mod_authnz_ldap is both an authentication and authorization provider. The module mod_authz_host provides authorization and access control based on hostname, IP address or characteristics of the request, but is not part of the authentication provider system. For backwards compatibility with the mod_access, there is a new module mod_access_compat.

You probably also want to take a look at the Access Control howto, which discusses the various ways to control access to your server.

Introduction

If you have information on your web site that is sensitive or intended for only a small group of people, the techniques in this article will help you make sure that the people that see those pages are the people that you wanted to see them.

This article covers the "standard" way of protecting parts of your web site that most of you are going to use.

The Prerequisites

The directives discussed in this article will need to go either in your main server configuration file (typically in a <Directory> section), or in per-directory configuration files (.htaccess files).

If you plan to use .htaccess files, you will need to have a server configuration that permits putting authentication directives in these files. This is done with the AllowOverride directive, which specifies which directives, if any, may be put in per-directory configuration files.

Since we're talking here about authentication, you will need an AllowOverride directive like the following:

AllowOverride AuthConfig

Or, if you are just going to put the directives directly in your main server configuration file, you will of course need to have write permission to that file.

And you'll need to know a little bit about the directory structure of your server, in order to know where some files are kept. This should not be terribly difficult, and I'll try to make this clear when we come to that point.

You will also need to make sure that the modules mod_authn_core and mod_authz_core have either been built into the httpd binary or loaded by the apache2.conf configuration file. Both of these modules provide core directives and functionality that are critical to the configuration and use of authentication and authorization in the web server.

Getting it working

Here's the basics of password protecting a directory on your server.

First, you need to create a password file. Exactly how you do this will vary depending on what authentication provider you have chosen. More on that later. To start with, we'll use a text password file.

This file should be placed somewhere not accessible from the web. This is so that folks cannot download the password file. For example, if your documents are served out of /usr/local/apache/htdocs, you might want to put the password file(s) in /usr/local/apache/passwd.

To create the file, use the htpasswd utility that came with Apache. This will be located in the bin directory of wherever you installed Apache. If you have installed Apache from a third-party package, it may be in your execution path.

To create the file, type:

htpasswd will ask you for the password, and then ask you to type it again to confirm it:

If htpasswd is not in your path, of course you'll have to type the full path to the file to get it to run. With a default installation, it's located at /usr/local/apache2/bin/htpasswd

Next, you'll need to configure the server to request a password and tell the server which users are allowed access. You can do this either by editing the apache2.conf file or using an .htaccess file. For example, if you wish to protect the directory /usr/local/apache/htdocs/secret, you can use the following directives, either placed in the file /usr/local/apache/htdocs/secret/.htaccess, or placed in apache2.conf inside a <Directory "/usr/local/apache/htdocs/secret"> section.

AuthType Basic
AuthName "Restricted Files"
# (Following line optional)
AuthBasicProvider file
AuthUserFile "/usr/local/apache/passwd/passwords"
Require user rbowen

Let's examine each of those directives individually. The AuthType directive selects the method that is used to authenticate the user. The most common method is Basic, and this is the method implemented by mod_auth_basic. It is important to be aware, however, that Basic authentication sends the password from the client to the server unencrypted. This method should therefore not be used for highly sensitive data, unless accompanied by mod_ssl. Apache supports one other authentication method: AuthType Digest. This method is implemented by mod_auth_digest and was intended to be more secure. This is no longer the case and the connection should be encrypted with mod_ssl instead.

The AuthName directive sets the Realm to be used in the authentication. The realm serves two major functions. First, the client often presents this information to the user as part of the password dialog box. Second, it is used by the client to determine what password to send for a given authenticated area.

So, for example, once a client has authenticated in the "Restricted Files" area, it will automatically retry the same password for any area on the same server that is marked with the "Restricted Files" Realm. Therefore, you can prevent a user from being prompted more than once for a password by letting multiple restricted areas share the same realm. Of course, for security reasons, the client will always need to ask again for the password whenever the hostname of the server changes.

The AuthBasicProvider is, in this case, optional, since file is the default value for this directive. You'll need to use this directive if you are choosing a different source for authentication, such as mod_authn_dbm or mod_authn_dbd.

The AuthUserFile directive sets the path to the password file that we just created with htpasswd. If you have a large number of users, it can be quite slow to search through a plain text file to authenticate the user on each request. Apache also has the ability to store user information in fast database files. The mod_authn_dbm module provides the AuthDBMUserFile directive. These files can be created and manipulated with the dbmmanage and htdbm programs. Many other types of authentication options are available from third party modules.

Finally, the Require directive provides the authorization part of the process by setting the user that is allowed to access this region of the server. In the next section, we discuss various ways to use the Require directive.

Letting more than one person in

The directives above only let one person (specifically someone with a username of rbowen) into the directory. In most cases, you'll want to let more than one person in. This is where the AuthGroupFile comes in.

If you want to let more than one person in, you'll need to create a group file that associates group names with a list of users in that group. The format of this file is pretty simple, and you can create it with your favorite editor. The contents of the file will look like this:

That's just a list of the members of the group in a long line separated by spaces.

To add a user to your already existing password file, type:

You'll get the same response as before, but it will be appended to the existing file, rather than creating a new file. (It's the -c that makes it create a new password file).

Now, you need to modify your .htaccess file or <Directory> block to look like the following:

AuthType Basic
AuthName "By Invitation O